Inkbird Heat Cool Temp Control Thermostat ITC-308 C/F + Humid Humidistat IHC-200

Description

Inkbird Digital 230V
Pre-wired Programmable Temperature Controller Thermostats
Heat Cool
ITC-308 + Humidity Controller Humidistats IHC-200
ITC-308 :INKBIRD Digital 230V AC Pre-wired Temperature Controller thermostats for curing meat , home brewing,Wine making, Plant room ,Reptile habitat temperature control, Seed Germination,
Fresh keeping etc
Features:
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with
Centigrade or Fahrenheit unit
;
Maximum output load: 2400W(240V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Compressor delay protection for refrigeration control High and low temperature alarms are available;
-
Over-temperature and sensor fault alarm Temperature calibration;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
-
F/C degree display
; Easy to set, PV and SV dual display windows
- Dual display window, be able to display measured temperature and set temperature at the same time
- The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
- Alarm when over-temperature and sensor error
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Specification:
- Temperature Control Range :
-50~120 °C / -58~210°F
- Temperature Resolution: 0.1 ° C / 0.1° F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output:
Max. 10A, 100V ~240V AC  (It can apply to the voltage from 100V to 240V)
- Buzzer Alarm: High and Low
- Socket: 112 x 46 x 27 mm( 4.1 x 1.8 x 1.0 inch)
-
Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft
- Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
- Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)
- Warranty: 1 Year
How to work:
Connect with a heater and a cooler , heating socket for heater,cooling socket for cooler.
The temperature range you want to control is: 20~30℃ ,then you can set TS=25℃, HD=5,CD=5.
When Ambient Temperature is higher than 30℃(TS+CD), it will turn on the cooler, turn off at 25℃.
When Ambient humidity is lower than 20℃(TS-HD), it will turn on the heater, turn off at 25℃.
IHC-200 :INKBIRD Digital 230V AC Pre-wired Humidity Controller for curing meat , sausage making , food , wine & good storage , Plant room ,Reptile habitat humidity control , Fresh keeping etc
Description:
- Play n Plug design , Pre-wired, Programmable;
- Control humidity by setting value and differential value;
-
Delay protection
for Control output; Query current temperature;
- Dual windows display, showing current and setting value;
-
Switch the modes between humidification and dehumidification automatically
;
-
Alarm when sensor error or humidity exceeds limit;
-
Calibrate the humidity value;
-
Alarm when humidity exceeds high/low humidity setting value;
-
Work 1 socket for humidification output, Work 2 socket for dehumidification output
How to work:
Connect with humidifier and dehumidifier, Work 1 socket for humidifier, Work 2 socket for dehumidifier.
The humidity range you want to control is: 60~70%Rh,then you can set HS=65%RH, HD=5,DD=5.
When Ambient humidity is higher than 70%RH(HS+DD), it will turn on the dehumidifier, turn off at 65%Rh.
When Ambient humidity is lower than 60%RH(HS-DD), it will turn on the humidifier, turn off at 65%Rh.
Feature:
-
Power Input: 100 ~240VAC, 50Hz/60Hz
-
Power Output:
Max. 10A, 100V ~240V AC
-
Humidity Measuring Range : 5%-99.99%RH
-
Humidity Control Range : 5%-99%RH
-
Resolution: 1%RH
;
Accuracy: ±3%RH
-
Sensor model: AM-2301
-
Sensor stability: <0.5%RH/yr
-
Sensor Length：
2m / 6.56ft
-
Relay Contact Capacity：
-
Humidification (12A, 100-240VAC)
-
Dehumidification (12A, 100-240VAC)
-
Input Power Cable Length: 1.5m (5ft)
-
Output Power Cable Length: 30cm (1ft)
-
Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
-
Socket: 85x42x24mm(3.3x1.7x1inch)
-
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
-
Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
-
Humidity 20~85% (No Condensate)
-
Warranty: 1 Year
ITC-308WiFi :
Inkbird Digital Heat & Cool APP Remote Temperature Controller Outlet Thermostat, 2-stage,  w/Sensor (AU Plug)
Bullet Point：
- WIFI & APP :WIFI smart controller supports both
IOS & Android
，WIFI supports 2.4GHz Wi-Fi router;
-
Free APP
“InkbirdSmart” which is able to monitor temperature at any time;
- Dual Relay Output : Dual relay output, which can connect heating and cooling device at the same time;
-
Alarm for Safe
: High/Low temperature limit setting alarm;
- Convenient Design :
Plug-n-play, easy to use.
- Support
℃/℉reading and Temperature calibration;
-Long Warranty :The controller itself has 2 years warranty while the temperature sensor has 1 year warranty.
Feature：
- Plug and play design, easy to use.
- Support reading with
Centigrade or Fahrenheit
.
- Maximum output load:
2200W(220V)
- Temperature calibration, Compressor delay protection for refrigeration control.
- High and low temperature alarms are available.
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time.
- Dual display window, be able to display measured temperature and set temperature at the same time.
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Power: Voltage:
100~230Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac), 2200W(220Vac)
- Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
- Temperature measurement range:-40℃~100℃/-40℉~212℉
- Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)
- Display unit:
Celsius ℃ or Fahrenheit ℉
- Ambient temperature: -20℃~60℃/-4℉~140℉
- Storage environment: temperature:0℃~60℃/32℉~140℉;
- Humidity: 20~80%RH(Unfrozen or condensation )
-
Warranty:Controller:2 years warranty
IHC-200WiFi :
Inkbird Digital Wi-Fi Humidity Controller, Dual Outlet Pre-Wired Humidistat for Home Brewing, Fermentation, Breeding, Incubation, Greenhouse, Support Humidifier, Dehumidifier, Fan, iOS & Andriod
Description:
● 【Dual Relay Output】: Support both humidifying equipment and dehumidifying equipment.
● 【
Humidity measurement range
】: 10 ~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
● 【Plug-n-Play
】:  No complicated installation required.
● 【Dual display Windows
】: Display the set humidity value and the measured humidity value at the same time with 2 screens.
● 【Humidity calibration
】 : Support humidity calibration and dehumidification control delay protection.
● 【
Remote Control
】:Connect the IHC-200 Wi-Fi humidity controller to
2.4GHz Wi-Fi
, monitor or adjust the humidity on your phone through the app at any time anywhere.
● 【High/Low Humidity Alarm
】: Set a High/Low Humidity Alarm,alarms and reminds you if the humidity value exceeds the setting value,alarms when a probe error occurs.
● 【Alarm stop
】:  Press any button to turn off the alarm sound or you can turn it off on your phone
● 【
Warranty
】:
INKBIRD will provide2 years warranty
Specification
- Voltage:
100-230Vac 50/60Hz  ; Current: 10A
- Maximum Power: 1200W(120Vac), 2200W(220Vac)
- Humidity Measurement Range: 10~99%RH
- Humidity Display Accuracy: 0.1%RH
- Relative Humidity Accuracy(10% to 95%RH): Typ: ±3%RH, Max: ±5%RH
- Display Unit: %RH
- Operating Ambient Temperature: -20℃~40℃/-4℉~104℉
- Storage Temperature: 0℃~60℃/32℉~140℉
- Storage Humidity:
20~80%RH(not frozen or dewed)
- Waterproof Grade: not waterproof
- Wireless Connection:
Wi-Fi Connection.
- Controller Warranty: 2 years
Notes:
- Do not put probes or metal wire into fire.
- Do not put probes into water, it may lead to inaccurate measurements.
-
Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).
Working Rules:
Connect with humidifier and dehumidifier, Work 1 socket for humidifier, Work 2 socket for dehumidifier.
The humidity range you want to control is: 60~70%Rh,then you can set HS=65%RH, HD=5,DD=5.
When Ambient humidity is higher than 70%RH(HS+DD), it will turn on the dehumidifier, turn off at 65%Rh.
When Ambient humidity is lower than 60%RH(HS-DD), it will turn on the humidifier, turn off at 65%Rh.
Package Contents(Depends on your order)：
ITC-308+IHC-200(Normal Version)
Package:
1 x ITC-308 Temperature Controller(AU Plug)
1 x ITC-308 User Manual
1
x
IHC-200 Humidity Controller
(AU Plug)
1
x
IHC-200 User’s Manual
1
x
Warranty Card
ITC-308+IHC-200(WiFi Version)
Package:
1 x ITC-308WiFi Temperature Controller(AU Plug)
1 x ITC-308WiFi User Manual
1
x
IHC-200WiFi Humidity Controller
(AU Plug)
1
x
IHC-200WiFi User’s Manual
1
x
Warranty Card