-40%
FIVE 1/2" SHANK ROUTER BITS +POLYCARBON BASE PLATE+INLAY KIT+ (4) VACUUM FITINGS
$ 34.32
- Description
- Size Guide
Description
WE ARE HAPPY TO COMBINE MULTIPLE PURCHASES INTO ONE SHIPMENT IN ORDER TO REDUCE SHIPPING COST. HOWEVER, WE ASK THAT YOU DO NOT PAY UNTIL WE HAVE A CHANCE TO SEND A COMBINED INVOICE WITH ALL THE SHIPPING OPTIONS.From our Woodworking Days of yesteryear, we offer a GROUP OF FIVE 1/2" SHANK CARBIDE ROUTER BITS(SEE PHOTOS# 2-7); a UNIVERSAL POLYCARBONATE REPLACEMENT BASE PLATE KIT; a TWO PIECE ROUTER INLAY KIT WITH RETAINING NUT; and, a GROUP OF FOUR VACUUM SYSTEM FITTINGS. DETAILS:
****#1 - WOODLINE 2 FLUTE FLUSH TRIM BIT WITH SHEAR - diameter = 1/2"; length = 2". SOME USE TO BE SEEN. Photo# 3.
****#2 - WOODLINE PLUNGE STRAIGHT BIT - diameter = 3/4"; length = 1 1/4". APPEARS TO HAVE BEEN NEVER USED. Photo# 4.
****#3 - WOODLINE PATTERN BIT WITH 3/4" BEARING - diameter = 3/4"; length = 1 1/4". VERY LITTLE USE TO BE SEEN. Photo# 5.
****#4 - WOODLINE 2 FLUTE STRAIGHT BIT - diameter = 1/2"; length = 2 1/2". NEVER USED(STILL ENCASED IN PLASTIC COVERING). Photo# 6.
****#5 - GRIZZLY 45^ CHAMFER BIT WITH GUIDE BEARING - diameter = 1 1/8"; length = 2 1/4". APPEARS TO HAVE BEEN NEVER USED. Photo# 7.
COMMENT: According to the Internet ratings, Woodline router bits are: "quality at affordable prices"; and, Grizzly bits are: "goid bits at a good price".
****#6 - UNIVERSAL 3/8" THICK 8" DIAMETER BAYER MAKROLON POLYCARBONATE ROUTER BASE PLATE with CENTERING PIN, CENTERING WASHER, TAPPING PINS & EXTRA LONG SCREWS(photos #8-10) - it has an extra large 8" diameter and is extra thick at 3/8"(most other round base plates have a 6 1/2" diameter and a thickness of 1/4". Includes instructions. This was purchased new from Rockler.
COMMENT: using a router with just the metal base is not usually advised because of safety issues and possible lack of control over the router. For this reason a smooth flat base plate(= sub-base), usually made from thick plastic, is found attached to the metal base plate of routers sold for home shop use.
However, the original router sub base is usually not very large and thick and so, for incressed stability and flexibility or for use on a router table, there is a need to replace the factory sub- base. This auction offers a kit to precisely replace this sub-base - it comes with a centering pin and washer to center the replacement base plate to the collet; tapping pins to mark the drill.holes on the plastic plate; and, extra long screws to accommodate the 3/8" thickness(replacing the original screws).
THE BEAUTY OF THIS is that when you buy another router there is NO NEED TO BUY ANOTHER BASE PLATE - you just use the centering kit and tapping pins to drill new holes in the plate to fit the new router. Has THREE 4" SCREW-IN INSERTS to fit any size router bit - a 1 3/16" opening insert, a 2 5/8" opening insert, and, a blank insert(make your own opening).
****#7 - SOLID BRASS TWO PIECE ROUTER INLAY KIT PLUS RETAINER NUT(photo# 11). This fits any router that ACCEPTS A STANDARD 1 3/16" TWO PIECE TEMPLATE GUIDE BUSHING or a router that has an ADAPTER THAT ACCEPTS SUCH. Includes instructions. This was purchased new from Eagle America(Pricecutter.com).
COMMENT: neat little kit that allows the same pattern to be used for cutting the negative and positive asoects of the inlay. For the cutting of the negative(cut out recess) the bushing is used with the sleeve and a 1/8" diameter spiral shear bit. For the positive(cut through inlay piece), the bushing is used without the sleeve and a spiral bit to cut through the inlay material. The skeeve compensates for the 1/8 diameter bit being used for the cutting of the interior of the pattern outline and the exterior of the pattern outline.
****#8 - 11 - FOUR PIECES OF VACUUM SYSTEM FITTINGS(photo# 12), including 4" to 2 1/2" REDUCER(leftmost in photo); 2 3/4" O.D. to 2 1/2" O.D. ADAPTER(2 5/16" I.D.) - 2nd from left in photo; HOSE ADAPTER WITH LARGE END TO FIT SNUGLY IN 2 1/2" HOSE and VERSATILE ADAPTER ENDS of 2", 1 1/2", ! 1/4" & 1" O.D. SIZES(I.D. SIZES are 1/4" less) to attach to MULTIPLE POWER TOOLS(2nd from right in photo; and, 2" Schedule 80 PVC MALE STANDARD PIPE THREAD ADAPTER PLUG(MPT) - rightmost in photo. These were purchased new from Rockler.
CONDITION: THE FIVE ROUTER BITS ARE IN EXCELLENT CONDITION - NO NICKS, DINGS OR BURNS TO CUTTING BLADES. All of the ither items are in superb never used condition.
PRICING GUIDELINES: in checking Ebay's 3 month & Worthpoint's 15 year histories, we couldn't find any sales or Ebay current offers for sale of any Woodline 1/2" shank router bits of the type offered in this auction. However, we did find sales of comparable Amanda, Arden & Freud bits:
For Woodline 1/2” diameter flush trim bit - CMT ; Woodline 3/4” diameter plunge straight bit - Amana , Amana ; Woodline 3/4” diameter pattern bit with bearing - CMT , Arden ; and, Woodline 1/2” diameter 2 flute straight bit - Freud , Freud & Freud .
For the Grizzly 1/2” shank 45^ chamfer bit with bearing - diameter = 1 1/8” & length = 2 1/4”, we did find one sale for but for a much smaller 1/4” shank 7 1/2^ chamfer bit(diameter = 1/2”; length = 1/2”).
For the Universal base plate kit; the brass 2 piece inlay kit; and, the 5 pieces of vacuum system adapters, we couldn't find any sales or current offers for sale.
Please check out these Websites.
Everything we sell is unconditionally guaranteed to be in as described condition. Our shipping costs do not include any "hidden" charges, as with some who set a low start price and then add - as a "handling" fee. Usually, we will pack & ship the items ourselves, charging only the actual postage&insurance fees+.25 for the box&bubble wrap. INVENTORY#0215-#4442(#4159, 4178 & 9169) & 5545-B125-A20#4